Expansion Module IT42
6DD1606-4AB0
Expansion Module IT42
The IT42 expansion module is used in conjunction with the PM4 processor board in the SIMADYN D system to process general technological open-loop and closed-loop control tasks, such as hydraulic controls or closed-pressure controls.
The IT42 expansion module is plugged-onto the PM4 basic processor board using a 96-pin plug connector. The expansion module power supply is powered through the basic processor board.
The expansion module has 4 analog- and 16 binary inputs/outputs, as well as 4 integrating, floating analog inputs with voltage-frequency converters.
- Binary outputs (connector X8)
- 16 non-floating binary outputs
- Analog outputs (connector X7)
- 4 Outputs with associated ground, non-floating
- Analog inputs (ADC, connector X7)
- 4 Differential inputs, non-floating;
- Input range -10V +/-4LSB to +10V+/-4LSB (1LSB=4.88mV)
- Analog inputs (VFC, connector X6)
- 4 Differential inputs, floating, integrating, V/F conversion;
- Input range: -10 V to +10 V
- Resolution depends on the integration time
- up to 17 bit
- 13 bit for 1 ms integration time
- 15 bit for 4 ms integration time
- 17 bit for 20 ms integration time
Module features:
- 3 front panel connectors X6, X7 and X8 for the input- and output signals
- 4 analog inputs (ADC) 12-bit resolution, typical 10-bit absolute accuracy over the complete temperature range
- 4 analog outputs 16-bit resolution, 14-bit monotone, typical 13-bit absolute accuracy over the complete temperature range
- 4 integrating analog inputs (floating, VFC converter) 17-bit resolution, typical 14-bit relative accuracy over the complete temperature range
- 4 external trigger inputs for VFC analog inputs
- 16 binary inputs
- 16 binary outputs with P24 connection for the external supply
Module can be used only with PM4
is P32 processor modules with low-priced R3081 processor
Signals conditioning modules
Signals has to be powered and conditioned via interface modules - see related products:
- SB10 6DD 1681 - 0AE2 8, 24 V binary inputs or outputs, LED non-floating
- SB60 6DD 1681 - 0AF4 8, 220 V / 24 V binary inputs, LED floating
- SB61 6DD 1681 - 0EB3 8, 48 V / 24 V binary inputs, LED floating
- SU12 6DD 1681 - 0AJ1 10 terminals / 10-pin connector
- SU10 6DD 1681 - 0FG0
26 terminals / 26-pin connector acc. to DIN 41651
Connection cables
Cables to be used to connect the interface modules to the board:
- SC7 6DD 1684 - 0AH0 10-core ribbon cable; length : 2m
- SC49 6DD 1684 - 0EK0 Twisted pair, shielded 50-core cable
- Converts between a sub-D plug connector acc. to DIN 41652
- and a 2x26-pin socket connector acc. to DIN 41651;
- SC50 6DD 1684 - 0FA0 Twisted pair, shielded 15-core cable
- Converts between a sub-D plug connector acc. to DIN 41652
- and a 26-pin socket connector acc. to DIN 41651
- SC51 6DD 1684 - 0FB0 Twisted pair, shielded 25-core cable
- Converts between a sub-D plug connector acc. to DIN 41652
- and a 26-pin socket connector acc. to DIN 41651 ;
Siemens
Siemens Teleperm XP (T2000)
